2066.31系列水压力传感器

PRODUCTS > Marquart > 2066.31系列水压力传感器

2066.31系列水压力传感器

膜和霍尔传感器原理的压力测量
坚固的结构
测量范围,输出信号,电源电压以及机械和电气连接的不同变体
集成温度补偿
客户特定的可编程输出信号特性

Drinking water filtration system(31xx, CVV)

image.png

The sensors measure the pressure before and after the filter. With a registered drop in pressure it is time to replace the filter.

Application examples:

  Minimum operating pressure for burner-/ pump-starting

  Protection against dry running of equipment (burners / pumps)

  Function / operation condition-control for e.g. signal change at pumps starting or stopping

  Maximum pressure control of equipment

  Automatic export water supply in case of pressure decline

  Over pressure protection of solar water heating equipment

  Load/pressure-dependent controlled / regulated ( thermostat-) valves or pumps, e.g. at booster-/pressurizer-stations

  Overload protection

Product Description

Magnetic pressure sensor with analogue output signal

For liquid or gas pressure measurement

Measuring pressure 0--4,5 bar/450KPa (21xx)

Measuring pressure 0--10 bar/1MPa(31xx) 

Materials with medium contact are approved to be used in drinking water applications (31xx)


Advantages:

 Robust and simple design

 Linear measuring range

 Fully automatic 100% final test and  calibration for best accuracy

Functional Principle

Movable membrane loaded with pressure

With this travel a permanent magnet is moved relative to a Hall-IC

The Hall-IC transforms the impressed magnetic field into a proportional voltage signal

image.png

Pressure sensor 2066.31xx

image.png

Mounting Methods

image.png

Plug on flange

Proposal for possible adaption of the water pressure sensor with plug on flange in the customer application. This adaption is used at different customers.

O-ring: 

- 9,5 x 2,5 EPDM 70 shore A

- O-ring has to be greased

image.png

Screw flange

Proposal for possible adaption for the water pressure sensor with screw flange in the customer application. This adaption is used at different customers. 

O-ring:

- 14 x 1,78 mm EPDM 70 Shore A

- O-ring has to be greased


image.png

Mounting Indication


The influence of external magnetic fields on the sensor signal may be eliminated by keeping minimum distances. Here are the dimensions for the minimum distances shown:

image.pngimage.png

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit